۰

iMprovMi

روش شناسی

مجموعه های فعال

سیستم های های انتقال و جابجایی مواد

درباره

2022

شرکت پارس ابزار باستان

شرکت پارس ابزار باستان فعال در زمینه  طراحی ، ساخت و اجرای کامل انواع کانوایر و ساخت قطعات مربوط به آن (رولیک و درام) فعالیت دارد. اجرای پروژه ها به صورت EPC از توانمندی این شرکت در زمینه تجهیزات  کانوایر و نوار نقاله می باشد. 

این شرکت در زمینه مهندسی معکوس ، تهیه نقشه و تدوین تکنولوژی  ساخت قطعات ، ممجموعه ها و تجهیزات توسط مهندسی معکوس  عملکرد مطلوبی داشته است. همچنین در زمینه افزایش ظرفیت خطوط تولید نیز  از طریق بهبود کارایی و راندمان ایستگاه های کاری و اعمال تغییرات مطلوب و اتوماسیون روی دستگاه ها و رفع گلوگاه های کاری در کارخانه های فولاد سازی و معادن و ذوب فلزات فعالیت های مستمری درز این شرکت در حال انجام می باشدد.

1
+
B

Ability to Produce Datasheets

2
+
B

Design performance

20 / 20

100 / CH

3
+
B

100 / CH

Construction performance

20 / 18

4

Employee & Learning

+
B

100 / CH

20 / 18

5
+
B

100 / CH

20 / 18

Maintenance  Requirement

7

Safety  Requirement

+
B

100 / CH

20 / 18

7

Sold Product Performance

+
B

100 / CH

20 / 20​​​​​​​

در این بخش توانایی تولید مدارک و مشخصات فنی تجهیزات درام و نوار نقاله توسط شرکت مورد بررسی قرار می گیرد.

مشاهده عملکرد

در این بخش توانایی تولید مدارک طراحی و مهندسی تجهیزات درام نوار نقاله توسط شرکت مورد بررسی قرار می گیرد.

مشاهده عملکرد

در این بخش توانایی تولید و تجهیزات ساخت کارگاه درام نوار نقاله  مورد بررسی قرار می گیرد.

در این بخش اهتمام شرکت به اصول آموزش پرسنل درام نوار نقاله  مورد بررسی قرار می گیرد.

در این بخش اهتمام و توانمندی شرکت در تعمیرات و نگهداری درام نوار نقاله  مورد بررسی قرار می گیرد.

در این بخش اهتمام و توانمندی شرکت در رعایت اصول ایمنی درام نوار نقاله  مورد بررسی قرار می گیرد.

در این بخش عملکرد محصولات فروخته شده درام نوار نقاله توسط شرکت مورد بررسی قرار می گیرد.

مشاهده عملکرد
مشاهده عملکرد
مشاهده عملکرد
مشاهده عملکرد
مشاهده عملکرد
جهت دسترسی سریع به سایت اختصاصی شرکت روی لوگو شرکت کلیک کنید

 ​​Reference Document Assessment of Ability to Produce or Follow
ارزیابی بر توانایی تولید یا تبعیت از مدارک مرجع و پایه پروژه تعریفی

+
B

100 / CH​​​​​​​

Ability to Produce Datasheets

1

20 / CH​​​​​​​

​​Compliance with the Employers Scope of Supplye
Ability to procurement and install ceramic & rubber lining for drum surfaces of  according to the related drawings or specification
Vendor Equipped special tools for installation and erection
Vendor Ability to Prepare Shop Drawings  of all equipment According to the scope of supplier
Ability to purchase the required raw materials of the works from the related valid manufacturer or company
All of raw materials shall have their quality control certificate of the related manufacturer. Also all materials shall receive prior approval of the buyer or his representative. Any deviation is subject to the buyer or his representative approval​​​​​​​

+
B

100 / CH​​​​​​​

1

20 / CH​​​​​​​

Design performance

​​All equipment shall be designed such that all components are easily accessible for inspection, repair and maintenance
 All rotating parts (if any) shall be provided with anti-friction bearing type
 Made up all box type structures with Steel Plates with Suitable Diaphragm and rolled Shape RFC
Standardization of components and assemblies shall be carried out to the maximum possible extent to ensure interchangeability
All design and manufacturing should be one according to latest revision of European standards
All bolt holes shall be shown on the shop drawings
AWS standard shall be considered for Welded Junctions
All wear plates at any part of the machines, shall be bolted and easily replaceable
The arrangement shall make all parts available for easy and fast maintenance
​​​​​​​​​​​​Supplier shall design and manufacture the package (including the contribution of the driver) doing all the best efforts so that noise emissions are reduced at minimum considering all updated technology. Maximum allowable noise level is 85dB (A) @ 1m for the complete unit. Any noise abatement device necessary to reach the above limit shall be included in the supplier's scope of supplyThe drive shall be such that no unwanted vibration forces are transmitted to the stationary structure

Construction performance

1

20 / CH​​​​​​​

100 / CH​​​​​​​

B
+

​​All rotating parts (if any) shall be provided with anti-friction bearing type
 AWS B3.0  Specification 
Requirement shall be confirmed for Base Material and Welding procedure
  The welds shall be carried out by welders who have passed the qualification tests
 Bolt holes shall be made by drilling or by a punch Machine
Bolt shank length should be grather than part which is to be tightened and washer shall use
.Sand Sa 2.1/2 and uniform inorganic galvanizing coating shall be considered for bolted joints
British Standards specifications BS3643 Part 1 & 2, ISO Metric screw threads shall be considred
Steel as Defined in the ASTM standards or similar shall be used
Supplier shall furnish complete lubrication instruction including types and grade of lubricants
Bolts shall be placed such that bolt and nut may be easily handled
Walkway and gratings shall be Galvanized carbon steel
The equipment shall be coated/painted in accordance with buyer standards with client approval. For more information, please see attachment II (PAINTING AND RUBBER LINING SPECIFICATION). Large iron components shall be galvanized or properly paint-coated. Small items such as screws, washers, etc. shall be of non-corrosive metal such as stainless steel or bronze or shall be protected by cadmium-plating, nickel-plating or silver-plating. Machined surfaces and bright parts normally left unpainted shall be coated with corrosion protective compounds which shall be easily removable during installation. Note: Supplier shall present painting procedure offer contract and get client`s approval
All supports shall be in steel or spherical cast iron with rolling bearing
Minimum life time for bearings shall be 50000 hours
More basic design requiremens for Wire rope,Equalizer Sheaves,Load

1

20 / CH​​​​​​​

100 / CH​​​​​​​

B
+

Employee & Learning

During the visit of PARS ABZAR BASTAN sepanta it was found that the level of training of employees and people  is of a intermediate level 

1

20 /CH​​​​​​​

100 / CH​​​​​​​

B
+

Safety  Requirement

The Seller is required to meet applicable recognized HSE conformity standards, approved by Buyer. The Seller shall carry out assessments of the risks, in the processes carried on materials used, or any risk arising from their work activities, not only to the health and safety and welfare of their own employees and the general public, but also the effects that their process/materials or work activities may have upon those employees of Buyer

 

1

20 / CH​​​​​​​

100 / CH​​​​​​​

B
+

Accessibility  

All working parts and lubrication points in so far as possible are to be arranged for easy accessibility, convenience of operation, inspection, lubrication and ease of replacement with
minimum downtime
All equipment shall be designed such that all components are easily accessible for inspection, repair and maintenance


1

20 / CH

100 / CH​​​​​​​

B
+

Maintenance  Requirement

The drum will be designed in order to minimize maintenance and make unavoidable maintenance safe, quick and easy. In order to minimize the frequency of maintenance, the temporary table of inspection and maintenance of crane components, contained in the offer documentation, must be drawn up in terms of previous engineering experience and subsequent improvements. The final table, which will be coherent with the temporary one, will be included in the instruction and maintenance manual and will be contractually binding. Each crane component must be configured according to the following maintenance requirements: The components to be maintained and/or inspected must be easily accessible with minimum disassembly; all guards covering components must be hinged and have quick locking systems and stays for their open positions. Every component must be easy to handle and equipped with hooks to allow them to be properly balanced when lifted. Components which need frequent maintenance must be easily accessible and they must not need special tools
​​​​​All equipment shall be designed such that all components are easily accessible for inspection, repair and maintenance
The arrangement shall make all parts available for easy and fast maintenance

سبد خرید