روش شناسی
مجموعه های فعال
سیستم های غبار نشانی
Ranking
درباره
2022
See total ranking
Get this page as PDF
شرکت وتوس
شرکت وتوس یک شرکت دانش بنیان در زمینه طراحی و ساخت پروژه های غبارنشانی جهت حذف آلاینده های ایجاد شده در فرایند های تولیدی و معدنی می باشد . این شرکت تحت عنوان در سال فعالیت خود را با بهره گیری از توانایی های آکادمیک در تعدادی از پروژه های صنعتی شروع و نتیجه قابل قبولی در این خصوص کسب نمود
از خصوصیات بارز شرکت وتوس می توان به دارا بودن تیمی دانشگاهی و جوان اشاره کرد که مفهوم عمل غبارنشانی را به صورت عمیق درک و پس از آن شروع بعه سرمایه گذاری و فعالیت در این زمینه نموده اند.
Reference Document Assessment of Ability to Produce or Follow
ارزیابی بر توانایی تولید یا تبعیت از مدارک مرجع و پایه پروژه تعریفی
Compliance with the Employers Scope of Supplye
Vendors Supply and installation ability of instrument and control devices
Vendor ability to supply All required components such as water filters, water and air pressure regulator, nozzles, hoses
Compliance with the Employers Motor Datasheet
Compliance with the Employers Electrical and Control Equipment Datasheet
Compliance with the Employers General Arrangement and issue crane final Arrangement
Vendor ability to Design, supply and installation of valve and piping components
Vendor having expertise for consideration ITP,License certificate,General catalogues,Standards,Time schedule,Spare part,definition of drawing
Vendor ability to provide part list and Time Schedule for execution of the project include all activities such as engineering
Vendor ability to provide Basic functional description,Equipment,instrument and catalogues
Vendor ability to provide Technical specification for equipment,Applicable code and standard
Vendoe ability to provide Equipment dimensional arrangement drawing,2 years spare part list and commissioning spare part list
Vendor ability to provide capital spare part list,Preliminary p&i diagram and Preliminary single line drawings,instrument data sheet , deviation list and quility control plan
Vendor ability to provide Equipment list/Motor list/Instrument list/ Electrical or control cubicles list
Forbidden to use plates with the thickness less than 8 mm for main frame
.M.A Rules sould be conform for welded joint working details
Vendor ability to provide Technical specification for electro motors, frequency converters,instrumentation and control system
Vendor ability to provide General arrangement of equipment and sectional drawing including BOM
Vendor ability to provide Dust suppression station arrangement drawing including all equipment and required axillaries
Vendor ability to provide drawing and document list,Foundation drawing with loads,interface and load indications,Shop drawing for all mechanical parts,data sheet & technical specification for all items and QCTM
AWS standard shall be considered for Welded Junctions
Rolled shape profile to be used for the Supporting Structures must be symmetric
Minimum Thichness shuold be considered 8 mm for main structure and 5 mm for secondary
Vendor Ability to provide Equipment list,Marking drawing for spare parts,Lubrication data sheet and list of first filling,Packing list,Storage procedure, Installation and erection manual,Operating and maintenance manual,Process and instrumentation diagram (P&ID),Process Flow Diagram,Control Philosophy,Assembly and sub assembly drawing of equipment,Surface protection and painting specification,Calculation booklet, Logic diagrams, Connection drawings/Loop wiring diagrams,Signal List/IO List,Motor and component list,Motor data sheets,Motor dimension drawing, One‐line diagrams, Electrical schematic diagrams,Cables list and cable schedule,Panel fabrication drawings,Control system,All interfacing document (Interfaces to main DCS system via hard wire),LCS/Junction boxes list,Instrument list,Instrumentation data sheets and calculation sheets, Instrument location drawings,Welding Procedure,Final book
AWS B3.0 Specification Requirement shall be confirmed for Base Material and Welding procedure
The welds shall be carried out by welders who have passed the qualification tests
Bolt holes shall be made by drilling or by a punch Machine
Bolt shank length should be grather than part which is to be tightened and washer shall use.Sand Sa 2.1/2 and uniform inorganic galvanizing coating shall be considered for bolted joints
British Standards specifications BS3643 Part 1 & 2, ISO Metric screw threads shall be considred
Steel as Defined in the ASTM standards or similar shall be used
All machined surfaces outside of housing shall be protected with an easy removable paint. All inner parts of e.g. reducers shall be protected for an open storage
The scope of work comprises the provision of all labor, materials, equipment and services necessary to carry out the engineering, design, manufacturing, quality assurance, testing, documentation, identification, packing, delivery to site and supervision for installation and commissioning of equipment
The Couplings shall be made from forged Material
The equipment shall be coated / painted in accordance with buyer standards with client approval. For more information, please see attachment II (Painting Specification). Large iron components shall be galvanized or properly paint‐coated. Small items such as screws, washers, etc. shall be of non‐corrosive metal such as stainless steel or bronze or shall be protected by cadmium‐plating, nickel‐plating or silver‐plating. Machined surfaces and bright parts normally left unpainted shall be coated with corrosion protective compounds which shall be easily removable during instal
All drive shafts must be obtained from steel bar or tube and deflectin shall not exceed 1mm pm
All supports shall be in steel or spherical cast iron with rolling bearing
Minimum life time for bearings shall be 50000 hours
The Seller shall ensure that all stages of the Work are controlled in accordance with a Quality System that complies with all applicable elements of ISO 9001: 2008 series or local equivalent with the additional requirements specified herein. Should the Seller be unable to comply with the above requirements, or with any other requirement specified herein, it shall so advise Buyer and shall state its alternative proposal for assuring the quality of the equipment scope of supply
Provision for safe access of personnel to and around equipment for functions
The Seller is required to meet applicable recognized HSE conformity standards, approved by Buyer. The Seller shall carry out assessments of the risks, in the processes carried on materials used, or any risk arising from their work activities, not only to the health and welfare of their own employees and the general public, but also the effects that their process/materials or work activities may have upon those employees of Buyersafety and
All rotating members (couplings pulleys, gear, etc.) shall be protected by sturdy carters in plate
components, contained in the offer documentation, must be drawn up in terms of previous engineering experience and subsequent improvements. The final table, which will be coherent with the temporary one, will be included in the instruction and maintenance manual and will be contractually binding.
Each dust suppression component must be configured according to the following maintenance requirements: The components to be maintained and/or inspected must be easily accessible with minimum disassembly; all nozzles components must be fix and have quick locking systems and stays for their open positions. Every component must be easy to handle and equipped with hooks to allow them to be properly balanced when lifted. Components which need frequent maintenance must be easily accessible and they must not need special tools
تمامی حقوقی این وب سایت متعلق شرکت رهام بنیان صنعت است.
SDG2000
ما یک تیم هستیم
انرژی و آب و هوا
طبیعت
Fair use donation
Disclaimer
Privacy statement
سبد خرید