روش شناسی
مجموعه های فعال
سیستم های غبار گیر
Ranking
درباره
2022
شرکت شایان طرح
شرکت شایان طرح در سال 1385 تأسیس گردید، با تجربه ای حدود 25 ساله در زمینه طراحی، ساخت، نصب و راه اندازی دستگاه های غبارگیر و تجهیزات مرتبط و ارائه خدمات در کارخانجات سیمان و دیگر صنایع مطابق با جدیدترین تکنولوژی روز. فعالیت های خود را در زمینه بهبود شرایط زیست محیطی انجام می دهد.
این شرکت با انجام بیش از 200 پروژه فیلتراسیون در زمینه طراحی و ساخت، نصب تجهیزات غبارگیر در صنایع مختلف سیمان، فولاد و ذوب آهن و... جزء شرکت های پیشتاز در این زمینه در بازار ایران می باشد که با در اختیار داشتن کادری مجرب و کارگاه های مجهز قادر است پروژه های فیلتراسیون را در اسرع وقت با بهترین کیفیت به انجام برساند.
مزیت شرکت شایان طرح نسبت به رقبا در این زمینه این است که کلیه تجهیزات سیستم های فیلتراسیون و تجهیزات جانبی آن در کارگاه مجهز شایان طرح توسط پرسنل ماهر این شرکت و تحت نظارت این مجموعه ساخته می شود که حساسیت کارکرد این دستگاهها را به خوبی درک می کنند. همچنین با توجه به تجربه و دانش فنی کارشناسان زبده ما، راه حل های نوآورانه و به روز نیز در جت ارتقاء تجهیزات فیلتراسیون کارخانجات ارائه می گردد. میزان موفقیت این شرکت را می توان بسته به رضایت مشتری ها ارزیابی کرد. تعداد کارکنان این شرکت عبارتند از 50 نفر پرسنل مهندسی پروژه در دفتر مرکزی و 150نفر کارگر در کارگاه های ساخت و نصب می باشد.
در این بخش توانایی تولید مدارک و مشخصات فنی تجهیزات غبارگیر توسط شرکت مورد بررسی قرار می گیرد.
مشاهده عملکرد
در این بخش توانایی طراحی بخش های مختلف سیستم غبارگیر توسط شرکت مورد بررسی قرار می گیرد.
مشاهده عملکرد
در این بخش توانایی ساخت بخش های مختلف سیستم غبارگیر توسط شرکت مورد بررسی قرار می گیرد.
مشاهده عملکرد
در این بخش کیفیت آموزش توسط شرکت مورد بررسی قرار می گیرد.
مشاهده عملکرد
در این بخش توانایی تعمیر و نگهداری بخش های مختلف سیستم غبارگیر توسط شرکت مورد بررسی قرار می گیرد.
مشاهده عملکرد
در این بخش میزان رعایت اصول ایمنی بخش های مختلف سیستم غبارگیر توسط شرکت مورد بررسی قرار می گیرد.
مشاهده عملکرد
در این بخش میزان رعایت اصول دسترسی بخش های مختلف سیستم غبارگیر توسط شرکت مورد بررسی قرار می گیرد.
مشاهده عملکرد
در این بخش میزان رعایت اصول دسترسی بخش های مختلف سیستم غبارگیر توسط شرکت مورد بررسی قرار می گیرد.
مشاهده عملکرد
Reference Document Assessment of Ability to Produce or Follow
ارزیابی بر توانایی تولید یا تبعیت از مدارک مرجع و پایه پروژه تعریفی
Compliance with the Employers Scope of Supplye
Compliance with the project basic design about filter capacity,Airdust contect,Filtration Area
Compliance with the project basic design about cage material,cage wires diameter and bag cleaning
Compliance with the project basic design about Can velocity,Pressure drop,Compressor air required
Compliance with Screw Conveyor Specification Including Capacity,Speed,Motor Power
Compliance with Rotary valve Specification Including Capacity,Speed,Motor Power
Compliance with Electric Fan Specification Including Air Flow,Fan Speed,Motor Power,Impeller Type
Shaft Material,Blade Material,Blade Material,Efficiency at Operating Point,Vibrating sensor
Compliance with the Employers Motor Datasheet
Compliance with the Employers Electrical and Control Equipment Datasheet
Compliance with the Employers General Arrangement and issue crane final Arrangement
Compliance with the Project Considered Duct Specification Including Duct Material,Diameter of Stack,Type of stack,Height of stack
Compliance With the Instrumentation Required Specification Including Element Material ,Power Supply,Housing Material,IP class,Cable Entry and Rating
All equipment shall be designed such that all components are easily accessible for inspection, repair and maintenance
All rotating parts (if any) shall be provided with anti-friction bearing type
Made up all box type structures with Steel Plates with Suitable Diaphragm and rolled Shape RFC
Standardization of components and assemblies shall be carried out to the maximum possible extent to ensure interchangeability
All design and manufacturing should be one according to latest revision of European standards
All bolt holes shall be shown on the shop drawings
AWS standard shall be considered for Welded Junctions
All wear plates at any part of the machines, shall be bolted and easily replaceable
The arrangement shall make all parts available for easy and fast maintenance
Supplier shall design and manufacture the package (including the contribution of the driver) doing all the best efforts so that noise emissions are reduced at minimum considering all updated technology. Maximum allowable noise level is 85dB (A) @ 1m for the complete unit. Any noise abatement device necessary to reach the above limit shall be included in the supplier's scope of supplyThe drive shall be such that no unwanted vibration forces are transmitted to the stationary structure
All rotating parts (if any) shall be provided with anti-friction bearing type
AWS B3.0 Specification Requirement shall be confirmed for Base Material and Welding procedure
The welds shall be carried out by welders who have passed the qualification tests
Bolt holes shall be made by drilling or by a punch Machine
Bolt shank length should be grather than part which is to be tightened and washer shall use.Sand Sa 2.1/2 and uniform inorganic galvanizing coating shall be considered for bolted joints
British Standards specifications BS3643 Part 1 & 2, ISO Metric screw threads shall be considred
Steel as Defined in the ASTM standards or similar shall be used
Supplier shall furnish complete lubrication instruction including types and grade of lubricants
Bolts shall be placed such that bolt and nut may be easily handled
Walkway and gratings shall be Galvanized carbon steel
The equipment shall be coated/painted in accordance with buyer standards with client approval. For more information, please see attachment II (PAINTING AND RUBBER LINING SPECIFICATION). Large iron components shall be galvanized or properly paint-coated. Small items such as screws, washers, etc. shall be of non-corrosive metal such as stainless steel or bronze or shall be protected by cadmium-plating, nickel-plating or silver-plating. Machined surfaces and bright parts normally left unpainted shall be coated with corrosion protective compounds which shall be easily removable during installation. Note: Supplier shall present painting procedure offer contract and get client`s approval
All supports shall be in steel or spherical cast iron with rolling bearing
Minimum life time for bearings shall be 50000 hours
More basic design requiremens for Wire rope,Equalizer Sheaves,Load
The Seller is required to meet applicable recognized HSE conformity standards, approved by Buyer. The Seller shall carry out assessments of the risks, in the processes carried on materials used, or any risk arising from their work activities, not only to the health and safety and welfare of their own employees and the general public, but also the effects that their process/materials or work activities may have upon those employees of Buyer
All rotating members (couplings pulleys, gear) shall be protected by sturdy carters in plate
All heavy covers shall be provided with inspection windows. The carters of the driving and idle wheels of bridge and trolley shall be fitted with irremovable hinges
Large-sized protections and guards shall open horizontally to permit removal of the upper part during inspection without need to remove the lower part
All walking decks shall be in antiskid checkered plate with the exception of the walking deck formed by supporting box girders. For the walking decks outdoor buckle plate shall be used. The walking decks in very dusty environments shall be in sturdy grating having 20×20 mm max mesh
All working parts and lubrication points in so far as possible are to be arranged for easy accessibility, convenience of operation, inspection, lubrication and ease of replacement with
minimum downtime
All equipment shall be designed such that all components are easily accessible for inspection, repair and maintenance
The crane will be designed in order to minimize maintenance and make unavoidable maintenance safe, quick and easy. In order to minimize the frequency of maintenance, the temporary table of inspection and maintenance of crane components, contained in the offer documentation, must be drawn up in terms of previous engineering experience and subsequent improvements. The final table, which will be coherent with the temporary one, will be included in the instruction and maintenance manual and will be contractually binding. Each crane component must be configured according to the following maintenance requirements: The components to be maintained and/or inspected must be easily accessible with minimum disassembly; all guards covering components must be hinged and have quick locking systems and stays for their open positions. Every component must be easy to handle and equipped with hooks to allow them to be properly balanced when lifted. Components which need frequent maintenance must be easily accessible and they must not need special tools
All equipment shall be designed such that all components are easily accessible for inspection, repair and maintenance
The arrangement shall make all parts available for easy and fast maintenance
تمامی حقوقی این وب سایت متعلق شرکت رهام بنیان صنعت است.
SDG2000
ما یک تیم هستیم
انرژی و آب و هوا
طبیعت
Fair use donation
Disclaimer
Privacy statement
سبد خرید